|
2005 ACPA Profiler Repeatability Tests: Manufacturers Continue to Improve Profiler Technology (2006)
American Concrete Pavement Association - R & T Update #7.02
Assessment of Profiler Performance for Construction Quality Control (2002)
Steven M. Karamihas & Thomas D. Gillespie, University of Michigan Transportation Research Institute
Comparison of Transverse Tined & Longitudinal Diamond Ground Pavement Texturing for Newly Constructed Concrete Pavement (2002)
Paul L. Burge, et al, prepared for the Transportation Research Board
Developing Smooth, Quiet, Safe Portland Cement Concrete Pavements (2004)
James K. Cable & Steven M. Karamihas - Sponsored by the FHWA
Diamond Grinding Finish Profile on PCC Pavements (Missouri Best Practice Policy)
As presented on the FHWA website
Diamond Grinding Newly Placed PCCP (2005)
Missouri Dept. of Transportation
Effect of Broom Texture on Motorcycle Rideability (1972)
D.L. Spellman, et al, California Division of Highways
Effects of Grinding on PCC Pavements (1999)
Wisconsin Dept. of Transportation
Implementation of an International Roughness Index for Mn/DOT Pavement Construction & Rehabilitation (2007)
W. James Wilde, Minnesota State University
Improving Rideability at a Newly Constructed Pavement-Bridge Interface - A Case Study
Brian Schleppi and John Roberts
International Roughness Index (IRI): What is it? How is it Measured? What Do You Need to Know About it? (2002)
American Concrete Pavement Association, R & T Update #3.07
Noise & Skid Measurements on US 285 in the Turkey Creek Canyon Area: Project NH 2854-068 (2001)
Robert LaForce and Jill Schlaefer, Colorado Dept. of Transportation
Pavement Smoothness Index Relationships: FHWA Final Report (2002)
FHWA
Pavement Surface Texturing and Restoration for Highway Safety (1974)
Richard J. Rasmussen, International Grooving & Grinding Association
The Little Book of Profiling (1996)
Michael W. Sayers & Steve M. Karamihas, University of Michigan
|
