|
A Study of the Effect of Innovatively Textured Portland Cement Concrete Roadway Surfaces on Tire Pavement Noise (2009)
Tanya Wulf, Dr. Robert Bernhard and Tyler Dare
Acoustical Effects of Grinding and Grooving on Portland Cement Concrete Pavements (2009)
Tyler Dare, William Thornton, Tanya Wulf and Dr. Robert Bernhard
Acoustical Performance of Open-Cell Foam in Longitudinal Grooves on Concrete Roadways (2008)
Tyler Dare, Tanya Wulf and Dr. Robert Bernhard
An Overview of Methods to Quantify Annoyance Due to Noise with Application to Tire-Road Noise (2008)
Sarah McGuire and Patricia Davies
Analysis of Skid Values of Diamond Ground Cement Concrete Pavements with No Transverse Grooving
Pennsylvania Dept. of Transportation
Arizona SR202 PCCP Whisper Grinding Test Sections Final Report (2003)
Larry Scofield, Arizona Dept. of Transportation
Comparative Field Measurements of Tire Pavement Noise of Selected Texas Pavements (1998)
Michael T. McNerney, et al, Center for Transportation Research
Comparison of Transverse Tined & Longitudinal Diamond Ground Pavement Texturing for Newly Constructed Concrete Pavement (2002)
Paul L. Burge, et al, prepared for the Transportation Research Board
Concrete Paving Texture (1992)
G. Descornet & F. Fuchs, Belgian Road Research Centre
Crash Experience on Tined and Continuously Ground Portland Cement Concrete Pavements (1998)
Transportation Research Record 1639
Developing Smooth, Quiet, Safe Portland Cement Concrete Pavements (2004)
James K. Cable & Steven M. Karamihas - Sponsored by the FHWA
Development and Implementation of the Next Generation Concrete Surface (2012)
Larry Scofield, PE
Diamond Grinding Finish Profile on PCC Pavements (Missouri Best Practice Policy)
As presented on the FHWA website
Diamond Grinding for Roadway Noise Control (2002)
Areg Gharabegian and Emery Tuttle, Parsons Corporation
Diamond Grinding Newly Placed PCCP (2005)
Missouri Dept. of Transportation
Does Diamond Grinding Affect the Structural Capacity and Service Life of Concrete Pavements? (2001)
R & T Update No 2.07, ACPA
Effectiveness of Tire/Road Noise Abatement Through Surface Retexturing by Diamond Grinding (2005)
Executive Summary (2005)
Lloyd A. Herman and Jared M. Withers - Sponsored by the Ohio Dept. of Transportation
Effects of Grinding on PCC Pavements (1999)
Wisconsin Dept. of Transportation
Effects of Joints in Portland Cement Concrete Pavement (2008)
Will Thornton, Tyler Dare, Tanya Wulf and Dr. Roberts Bernhard
Evaluation of Cold Planers for Grinding PCC Pavements
B.F. Neal and J.H. Woodstorm
Evaluation of Noise Mitigation Alternatives for Route 85 (McClellan Rd to Pollard Rd) Executive Summary Only (2001)
Prepared by Parsons Transportation Group for Santa Clara Valley Transportation Authority
Evaluation of the Roto Mill Profiler on Concrete Pavements in Iowa
Clare Schroeder and Jerry Bergren, Iowa Dept. of Transportation
FHWA Technical Advisory: Surface Texture for Asphalt and Concrete Pavements (2005)
FHWA
Grinding of a Transversely Grooved Cement Concrete Pavement of the European Motorway E40 at Bierbeek (1993)
C. Caestecker and L. Heleven
Improving Rideability at a Newly Constructed Pavement-Bridge Interface - A Case Study
Brian Schleppi and John Roberts
MDOT Reports Success of I-275 Project to State Transportation Commission (2001 Press Release)
Michigan Dept. of Transportation
Minnesota State Aid Concrete Pavement Rehabilitation (CPR) Best Practices Manual (2006)
Minnesota Dept. of Transportation
Noise & Skid Measurements on US 285 in the Turkey Creek Canyon Area: Project NH 2854-068 (2001)
Robert LaForce and Jill Schlaefer, Colorado Dept. of Transportation
Noise & Texture on PCC Pavement: Results of a Multi-State Study (2000)
David A. Kuemmel, et al, Marquette University - Sponsered by Wisconsin Dept. of Transportation
Noise Reducing Concrete Pavements (1993)
G. Descornet & F. Fuchs, Belgian Road Research Centre and R. Buys, Robuco LTD
Pavement Macrotexture Review (1980)
FHWA
Pavement Surface Texturing and Restoration for Highway Safety (1974)
Richard J. Rasmussen, International Grooving & Grinding Association
Quieting Concrete Pavement Through Surface Texture Design & Modification (2006)
American Concrete Pavement Association, R & T Update #7.04
Quieting of Portland Cement Concrete Highway Surfaces with Texture Modifications (2005)
Paul Donavan, Illingworth & Rodkin
Relationship Between Pavement Surface Texture & Highway Traffic Noise (1998)
National Cooperative Highway Research Program Synthesis 268
Report on Tire Noise Along Interstate Route I-95 in the Town of Harrison, New York (2001)
Prepared by Parsons Brinckerhoff Quade & Douglas for the New York State Thruway Authority
Research Shows Concrete is Safe, Durable and Quiet (2004)
John Roberts, IGGA and Gerald Voigt & Michael Ayers, ACPA
Roadway Pavement Grinding Noise Study: I-215 Salt Lake City (2000)
Prepared by Parsons Brinckerhoff Quade & Douglas for the Utah Dept. of Transportation
Skid Accident Reduction Program: FHWA Technical Advisory (1980)
FHWA
Skid Resistance Manual (1990)
Excerpt from Draft Report Prepared by Penn State University for FHWA
Stop the Whine! Narrow Band Noise Level Measurements of Three Highway Pavements (1997)
Domenick Billera, New Jersey Dept. of Transportation and Bela Schmidt & Wayne Miller, Louis Berger & Associates
Surface Textures for PCC Pavements: Final Report (1978)
California Dept. of Transportation
The Effectiveness of Diamond Grinding Concrete Pavements in California (2005)
California Dept. of Transportation
The Longevity and Performance of Diamond-Ground Pavements (1999)
Shreenath Rao, H. Thomas Yu and Michael I. Darter
Traffic Noise: Assessment & Abatement (2002)
Colorado Dept. of Transportation |
